Troubleshooting
16
bizhub PRO 1050P 16-5
16.2 Clearing Mishandled Paper
When a paper misfeed occurs, the machine stops printing and the Jam Po-
sition Screen displays to indicate misfeed area(s).
The [Start] LED turns red on the control panel, and printing operation cannot
be continued until all the misfeed locations are cleared.
All the misfeed locations will be indicated by flashing/lighting numbers and
arrows on this screen. Flashing number and arrow indicate the jammed po-
sition of the highest priority.
Action to remove mishandled paper is displayed in the message area, and
touching [Illustration] will display subsequent screens for the disposal action.
Follow the procedure below to remove mishandled paper.
!
Details
A jam code can be displayed in the message area of the Jam Position
Screen. Contact your service representative, if desired.
1
2
3
No. Part name Description
1 Message area An action will be displayed.
2 Paper jam position
display
Numbers flashing or lighting indicate the jammed positions.
3 Illustration key Touch to display the subsequent screens for the disposal
action.
To Next Page
Loading...
Need help?
General
