Machine Specifications
18
bizhub PRO 1050P 18-3
18 Machine Specifications
These specifications are subject to change without notice.
18.1 Main Body Specifications
18.1.1 Main Body
Specifications
Name bizhub PRO 1050P
Type Console type
Transfer method Indirect electrostatic method
Light-sensitive unit OPC
Developing method Dry, 2-component magnetic brush developing
Fixing method Heat roller
Density adjustment Automatic and manual (9 steps)
Magnification ratio • 1:1
± 1.0%
•Enlargement:
1:1.154 (115.4%), 1:1.224 (122.4%), 1:1.414 (141.4%),
1:2.000 (200%)
•Reduction:
1:0.866 (86.6%), 1:0.816 (81.6%), 1:0.707 (70.7%), 1:0.500
(50%)
•Zoom/Special ratio magnification ratio:
25% to 400% in 0.1% increments
Print paper • Plain/Recycled paper: 60 to 90 g/m
2
• Thick paper: 91 to 300 g/m
2
• Thin paper: 50 to 59 g/m
2
• Special paper: OHP, Tab, 3-hole, Coated
* Ink-jet paper is unavailable.
Printing speed •
105 copies/min. (
A4
), 81 copies/min. (
A4
R),
•
105 copies/min. (
B5
), 91 copies/min. (B5R),
•
60 copies/min. (
A3
), 68 copies/min. (B4)
Continuous printing 1 to 9,999 copies
Paper size • Standard size:
A3 to
B6
R size (image cutoff width: leading and trailing
ends 2 mm
± 2 mm, top and bottom 1.5 mm ± 1.5 mm)
• Wide size and non-standard size:
Max. 324 mm x 460 mm
* Full-Image Area function is not provided on this machine.
Paper supply method Tray 1, 2 (universal); 1,500 sheets (80 g/m
2
)
Warm-up time Approx. 6 minutes @20°C; 50%RH
First print time Approx. 3.0 seconds (A4)
To Next Page
Loading...
Need help?
General
