14
Browser Control Setting
14-10 bizhub PRO 1050P
14.4 Administrator Mode
By logging into PageScope Web Connection in Administrator Mode, you can
configure or confirm the image controller system.
For the details on the login procedure for Administrator Mode, refer to “Log-
ging in Using Administrator Mode” on page 14-8.
14.5 System Tab
On the [System] tab, information concerning the system configuration of the
machine and settings is displayed.
14.5.1 Administrator Password
This screen appears when you click [Administrator Password] on the [Sys-
tem] tab. The screen is used to change the administrator password.
-
Current Password:
Enter the current administrator password. The password is displayed in
asterisks (1).
-
New Password:
Enter a new administrator password. Maximum eight alphanumeric char-
acters can used. The password is displayed in asterisks (1).
-
Retype New Password:
Retype the new password as entered above for confirmation.
-
[Apply] button:
Click the button to apply the new settings.
-
[Clear] button:
Click the button to clear the settings that were entered or selected.
To Next Page
Loading...
Need help?
General
