Preparation for Use
2
bizhub PRO 1050P 2-19
2.3.1 Auto Low Power
This function conserves energy by lowering the power consumption to 75W
or less in standby mode.
Auto Low Power activates automatically after a specified period (initially 15
minutes) of machine inactivity with the Power Save LED lit, touch panel gone
off, and all other LEDs except Start LED on the control panel turned off. The
Start LED will turn red, while the Power LED keeps green.
% To start a printing job, press [Power Save] on the control panel.
2
Note
The Auto Low Power function can be set to 5 minutes/ 10 minutes/ 15
minutes/ 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes.
For details, refer to “01 Power Save Setting” on page 13-6.
!
Details
If the Auto Shut-Off function activates at the same time, the power will be
turned off.
The touch panel will not go off when the Jam Position Screen is dis-
played.
2.3.2 Auto Shut-Off
This function achieves further energy conservation by reducing power con-
sumption in standby mode.
In the initial setting, Auto Shut-Off follows Auto Low Power after a specified
period (initially 60 minutes) of machine inactivity, with the Power Save LED lit
and all other LEDs on the control panel and touch panel turned off. The Pow-
er LED keeps green.
% To start a printing job, press [Power Save]. The printing operation will
become available.
2
Note
The Auto shut-off can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120
minutes/ 240 minutes, or can be deactivated. For details, refer to “01
Power Save Setting” on page 13-6.
To Next Page
Loading...
Need help?
General
