Printing Operation
5
bizhub PRO 1050P 5-5
5.2 Features of the bizhub PRO 1050P
-
Auto Low Power
Automatically lowers the power after a specified period of machine inac-
tivity.
-
Auto Reset
Automatically resets to the default settings after a specified period of ma-
chine inactivity.
-
Auto Shut-Off
Automatically shuts off the power after a specified period of machine in-
activity.
-
Booklet
Creates letter R or ledger size booklets from letter size originals in 1-2 or
2-2 mode.
-
Chapter
Starts chapter pages on the right side (front pages) of the finished docu-
ment. Only duplex mode (1-2) is compatible with this feature.
-
Combination
Prints a fixed number (2, 4, or 8) of pages onto one sheet of paper to cre-
ate a draft of a multi-page report at the same time as saving paper.
-
Image Shift
Creates or removes a binding margin at the top, bottom, right and left
edges (shift amount from 0 ~ 250mm, in 1mm increments); reduces im-
age to prevent image loss (reduce & shift amount from 0 ~ 250mm, in
1mm increments).
-
Job List
Displays the Job List Screen to view the current machine status, changes
the operation order of reserve jobs, deletes the unused reserve job, or
displays the previous job list.
-
Neg. Pos. Reverse
- Reverses the image from black-on-white to white-on-black or vice versa.
-
OHP Interleave
- Prints onto transparency film and interleave blank or printed paper for
each original printed.
-
Output for Machine with FS-503 Finisher Installed:
Non-Sort, Collated, Uncollated, and Staple modes using the primary
(main) tray.
Collated and Uncollated modes using the secondary (sub) tray.
-
Output for Machine with LS-501/502 Large Capacity Stacker In-
stalled:
Non-Sort, Collated, and Uncollated modes using the stacker
Collated and Uncollated modes using the stacker secondary (sub) tray
To Next Page
Loading...
Need help?
General
