Konica Minolta BIZHUB PRO 1050P User Manual

2
Preparation for Use
2-18 bizhub PRO 1050P
2.3 To Use Machine When Power Save LED Lights
If you find the Power Save LED lit on the control panel, the machine cannot
be operated due to the Power Save or Weekly Timer function.
% Press [Power Save] on the control panel.
If Power Save has been activated, the machine will become available
for printing operation.
2
Note
Power Save function has two modes; Auto Low Power and Auto Shut-
Off. See the following description for details.
This function can also be activated manually. For details, refer to “Using
Power Save Manually” on page 2-20.
If Weekly Timer has been activated, the Machine Status Screen will appear
with the message “Timer interrupt mode / Enter password” displayed in the
message area, and the machine operation will be available temporarily by the
Timer Interrupt function.
For details, refer to “When Weekly Timer Is Activat-
ed” on page 2-22.

Konica Minolta BIZHUB PRO 1050P Specifications

General

Brand	Konica Minolta
Model	BIZHUB PRO 1050P
Category	All in One Printer
Language	English