6
Setting Output Methods
6-12 bizhub PRO 1050P
6.5 Using Folder/Finisher Functions Manually
If the optional FD-501 Folding Unit and the FS-503 Finisher are installed, you
can load paper in the upper tray of the post inserter and manually staple,
punch, or fold sheets.
Specifications for Using Folder/Finisher Functions Manually
- When using folder/finisher functions manually, paper should be placed
only in the upper tray of the post inserter.
- Multi-feed detection is a feature that automatically stops the machine if
more than one sheet is fed at a time. The post inserter is designed to de-
tect multi-feeding. Coated paper and other kinds of smooth surface pa-
per may activate this function even if a single sheet is fed, stopping the
machine. Should this case occur frequently, press the Multi-Feed Detec-
tion button and light up the lower lamp, in order to turn the function OFF.
- Paper specifications for 1 or 2 stapling
– Paper size: A3, B4, F4, A4, A4R, B5, A5, 12"x18", 11"x17", 8.5"x14",
8.5"x11", 8.5"x11"R, 5.5"x8.5", 8K, 16K
– Paper weight: 50 - 244 g/m
2
– Number of sheets to be stapled: Maximum 100 sheets (80 g/m
2
)
- Paper specifications for punching
– Paper size:
– 2-hole: A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, 12"x18", 11"x17",
8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.5", 8K, 16K
– 4-hole: A3, B4, A4, B5, 12"x18", 11"x17", 8.5"x11", 8K, 16K
– Paper weight: 50 - 209 g/m
2
- Paper specifications for folding
– Paper size: A3, B4, A4R, 12"x18", 11"x17", 8.5"x14", 8.5"x11"R, 8K
–Paper weight:
– Z-Fold / Letter Fold-in / Letter Fold-out / Folding: 50 - 130 g/m
2
– Double Parallel / Gate: 50 - 91 g/m
2
To Next Page
Loading...
Need help?
General
