KTM 200 DUKE EU Repair Manual

16 ENGINE 122
16.4.6 Changing the conrod bearing (125 Duke)
304561-10
– Clamp the connecting rod with soft jaws.
– Remove the nuts 1.
– Remove the conrod bearing cover and crankshaft. Remove the bearing shells.
304562-10
– Measure the crank pin diameter.
Guideline
Crankshaft – diameter, crank pin
Crankshaft classification A 25.990… 25.998 mm (1.02323…
1.02354 in)
Crankshaft classification B 25.999… 26.006 mm (1.02358…
1.02386 in)
Info
The crankshaft classification is indicated by marking 2.
– Check the radial play of the lower conrod bearing. ( p. 121)
304563-10
– Oil the bearing shells.
– Position the conrod bearing cover according to marking 3.
– Mount and tighten nuts 1.
Guideline
Nut, conrod bearing M7 24 Nm
(17.7 lbf ft)

KTM 200 DUKE EU Specifications

General

Brand	KTM
Model	200 DUKE EU
Category	Motorcycle
Language	English