15 LIGHTING SYSTEM, INSTRUMENTS 79
15.8 Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Preparatory work
– Switch off all power consumers and switch off the engine.
601915-10
Main work
– Remove expanding rivets 1.
304865-10
– Remove screws 2.
– Lift the headlight mask slightly and swing forward.
B00762-10
– Remove screws 3.
– Take off cover 4.
B00763-10
– Pull the socket with bulb 5 out of the housing.
– Remove the bulb.
– Position a new light bulb in the socket.
Parking light (W5W/socket W2.1x9.5d) ( p. 207)
– Position the socket with bulb 5 in the housing.
To Next Page
Loading...
Need help?
General
