KTM 200 DUKE EU Repair Manual

16 ENGINE 157
304554-10
– Remove screws 2.
– Remove the stator.
304555-10
– Position the new stator.
– Mount and tighten screws 2.
Guideline
Screw, stator M5 8 Nm
(5.9 lbf ft)
Loctite
®
243™
– Position cable guide 3 in the alternator cover.
304553-10
– Position the cable retainer.
– Mount and tighten screw 1.
Guideline
Screw, retaining bracket,
stator cable
M5 8 Nm
(5.9 lbf ft)
Loctite
®
243™
16.4.57 Checking the electric starter drive (200 Duke)
304530-10
– Check the teeth and seating of the starter idler gear 1 for damage and wear.
» If there is damage or wear:
– Change the starter idler gear.
– Check the teeth and seating of the torque limiter 2 for damage and wear.
» If there is damage or wear:
– Change the torque limiter.
– Check the toothing and bearing of freewheel gear 3 for damage and wear.

KTM 200 DUKE EU Specifications

General

Brand	KTM
Model	200 DUKE EU
Category	Motorcycle
Language	English