17 SHIFT MECHANISM 193
17.1 Adjusting the shift lever
Info
The adjustment range of the shift lever is limited.
B00780-10
– Loosen nuts 1.
– Adjust the shift lever by turning shift rod 2.
Guideline
Shift rod adjustment range A 100… 112 mm (3.94… 4.41 in)
Info
Make the same adjustments on both sides.
At least five screw threads must be screwed into the seating.
– Check adjusting angle B.
Guideline
Adjusting angle B shift rod, deflector,
shift lever
90°
– Tighten nuts 1.
Info
After the nuts have been tightened, the bearings of the shift rod must be
centrally and identically aligned to each other in order to ensure freedom of
movement in the bearing shells.
– Check the shift lever to ensure it is functioning properly and can move freely.
To Next Page
Loading...
Need help?
General
