2-72
Installing and Setting up the Machine > Command Center RX
Accessing Command Center RX
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[Device Information] in the home screen > [Identification/Wired Network]
Examples: https://10.180.81.3/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well as their
current status.
2
Configure the function.
Select a category from the navigation bar on the left of the screen.
If the screen "There is a problem with this website's security certificate." is displayed, configure the
certificate.
Command Center RX User Guide
You can also continue the operation without configuring the certificate.
To fully access the features of the Command Center RX pages, enter the User Name and Password and
click [Login]. Entering the predefined administrator password allows the user to access all pages,
including Document Box, Address Book, and Settings on the navigation menu.
To Next Page
Loading...
Need help?
General