10-41
Troubleshooting > Adjustment/Maintenance
Drum Refresh 2
Remove white dots from the printout.
1
Load paper.
Load A4 or Letter size paper into the Multipurpose tray.
2
Display the screen.
[Home] key > [...] > [System Menu] > [Adjustment/Maintenance] > [Image Adjustment]
3
Perform the drum refresh.
"Image Adjustment" > [Drum Refresh 2] > [Execute]
"Drum Refresh 2" begins..
Drum Refresh 2 cannot be performed while printing. Execute Drum Refresh after the printing is done.
When you run [Drum Refresh 2], the machine sometimes makes a vibrating sound for
about 80 seconds until drum refreshing is completed. The toner soiling on the ejected paper
is normal and does not indicate a fault.
To Next Page
Loading...
Need help?
General