5-30
Operation on the Machine > Scanning with File Management Utility
Scanning with File Management Utility
"FMU Connection" is installed on the machine as a standard application.
FMU Connection can be used to scan an original according to the settings configured with "File Management Utility"
downloaded from our website, and save the image data and scanning information on a specified server or in a specified
folder. Unlike regular transmission functions, this application lets you use metadata such as the scan date and time and
the data format.
1
Configure the settings.
The first time you use FMU Connection, you must enable it in System Menu.
To use this function, you must install File Management Utility on your computer and configure settings for
the multifunction machine to be used, scanning conditions, and the file save location. To install File
Management Utility, refer to the following.
2
Make sure that File Management Utility is running on the computer (or server) on
which File Management Utility is installed.
3
Place the original.
4
Select [FMU Connection].
FMU Connection starts.
5
Follow the on-screen instructions to enter the necessary information and select
[Next].
6
When the scan settings screen appears, select each item and configure the
necessary settings.
The features that can be set depend on File Management Utility.
7
Press the [Start] key.
Sending starts.
Activating Applications (page 5-11)
Installing Software (page 2-52)
For information on using File Management Utility, refer to the following:
File Management Utility User Guide
Loading Originals (page 5-2)
To Next Page
Loading...
Need help?
General