4-22
Printing from PC > Printing Data Saved on the Printer
Printing Document from Stored Job Box
In Stored Job, the print data sent from the application is saved to the machine. You can set up a password as
necessary. If you set up a password, enter the password when printing. Print data will be stored in the Stored Job
Box after printing. This will allow printing of the same print data repeatedly.
1
Display the screen.
1 Select the [Home] key > [Job Box].
2 Select [Private Print/Stored Job].
3 Select the creator of the document.
2
Print the document.
1 Select the document to print > [Print]
2 Specify the number of copies to print as desired.
3 Select [start print].
Printing starts.
Simple Job Printing
When you save a print job performed via user login to the Stored Job Box, logging in with an ID card at the time
of printing displays a list of your print jobs in the Stored Job Box. When you run the print job, printing starts
immediately.
User login administration that uses the optional ID card Authentication Kit is required. For details on user login
administration for printing, refer to the following:
Adding a User (Local User List) (page 9-6)
User Login Administration for Printing (page 9-11)
For ID card settings, refer to the following:
ID Card Settings (page 9-29)
For Simple Job Printing settings, refer to the following:
Quick Job Printing (page 9-30)
If the document is protected by a password, the password entry screen will be displayed. Enter the
password using the numeric keys.
To Next Page
Loading...
Need help?
General