5-25
Operation on the Machine > Scanning using TWAIN or WIA
Scanning using TWAIN or WIA
This subsection explains how to scan an original using TWAIN. The WIA driver is used in the same way.
1
Display the screen.
1 Activate the TWAIN compatible application software.
2 Select the machine using the application and display the dialog box.
2
Configure the scan settings.
Select scanning settings in the dialog box that opens.
3
Place the originals.
4
Scan the originals.
Click the [Scan] button. The document data is scanned.
• When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-55)
• Before sending a document, confirm that TWAIN/WIA driver is installed on a computer and the settings are
con
figured.
Setting TWAIN Driver (page 2-64)
Setting WIA Driver (page 2-66)
For selecting the machine, see the Operation Guide or Help for each application software.
For the settings, refer to Help in the dialog box.
Loading Originals (page 5-2)
To Next Page
Loading...
Need help?
General