3-11
Preparation before Use > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
2
).
For details of the supported paper sizes, refer to the following:
Choosing the Appropriate Paper (page 11-14)
For the paper type setting, refer to the following:
Media Type Setting (page 8-17)
Be sure to use the multi purpose tray when you print on any special paper.
The capacity of the multi purpose tray is as follows.
• Plain paper (80 g/m
2
), recycled paper or color paper: 100 sheets
• Thick paper (106 to 220 g/m
2
): 5 sheets
• Thick paper (104.7 g/m
2
): 100 sheets
• Hagaki (Cardstock): 1 sheets
• Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei
4,
Yo
ukei 2:
5 sheets
• OHP film: 1 sheet
1
Open the multi purpose tray.
• If you are using a paper weight of 106 g/m
2
or more, set the media type to Thick and set the weight of
t
he paper you are using.
• Remove each transparency from the inner tray as it is printed. Leaving transparencies in the inne
r
tr
ay may cause a paper jam.
• When you load custom size paper, enter the paper size by referring to the following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-16)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
follo
wing:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) (page 3-16)
To Next Page
Loading...
Need help?
General