9-49
User Authentication and Accounting (User Login, Job Accounting) > Using Job Accounting
Apply Limit
This specifies how the machine behaves when the counter has reached the limit of restriction. The table below
describes the action taken.
1
Display the screen.
1 [Home] key > [...] > [System Menu] > [Job Accounting/Authentication]
2 "Job Accounting Setting" [Job Accounting Setting] > "Default Setting" [Apply Limit]
2
Configure the settings.
Select [Immediately], [Subsequently], or [Alert Only].
Item Descriptions
Immediately
*1
*1 The next job will be prohibited in sending or in storing in the box.
Job stops when the counter reaches its limit.
Subsequently Printing/scanning of the job continues but the subsequent job will be rejected.
Alert Only Job continues while displaying an alert message.
If the User Authentication screen appears, log in with a user who has the privilege to configure this setting. If
you do not know your login User Name or Password, please contact your Administrator.
To Next Page
Loading...
Need help?
General