5-58
Operation on the Machine > Using Document Boxes
Joining Documents in Custom Box
You can join documents within a custom box into one file.
1
Display the screen.
[Home] key > [Custom Box] > Select the box
2
Join the document.
1 Select the documents in the list that you wish to join by selecting the checkbox.
The document is marked with a checkmark.
You can join up to 10 documents.
2 [Others] > [Join].
3 Arrange the documents into the order in which they are to be joined.
Select the document you want to rearrange and select [Up] or [Down] to move it to the correct place in the
sequence.
4 [Next] > Enter the file name for the joined document
5 [Join] > [Join]
The documents are joined.
You can only join a document to other documents in the same custom box. If necessary, move the documents to be
joined beforehand.
If a custom box is protected by a password, enter the correct password.
To deselect, select the checkbox again and remove the checkmark.
Enter up to 64 characters as the file name.
After joining, the original documents are left unchanged. Delete the documents if they are no longer needed.
To Next Page
Loading...
Need help?
General