Malfunction
In case of an electrical malfunction, adjust
the exterior mirror by pressing on the edges
of the mirror glass.
Folding in/folding out the exterior
mirrors
NOTICE
Depending on the vehicle width, the vehi-
cle can be damaged in car washes. There is
a risk of damage to property. Before wash-
ing, fold in the mirrors by hand or with the
button.
To fold the exterior mirrors in/out,
press the button for folding the ex-
terior mirrors in/out on the driver's
door.
Folding is possible up to a speed of approx.
15 mph/20 km/h.
Folding the exterior mirrors in and out is
helpful in the following situations:
– In car washes.
– On narrow roads.
Exterior mirrors that were folded in are
folded out automatically at a speed of ap-
prox. 25 mph/40 km/h.
Automatic dimming
The exterior mirror on the driver's side is
automatically dimmed. Photocells in the in-
terior mirror are used to control this.
Automatic Curb Monitor
Principle
Depending on vehicle equipment, the mir-
ror glass on the front passenger's side is
tilted downward when reverse gear is en-
gaged. This improves your view of the curb
and other low-lying obstacles when parking,
for instance.
Activating the Automatic Curb
Monitor
1. To activate the Automatic Curb
Monitor, press the exterior mirror but-
ton on the driver’s door. The LED illumi-
nates.
2. Engage selector lever position R.
Deactivating the Automatic Curb
Monitor
To deactivate the Automatic Curb
Monitor, press the exterior mirror
button on the front passenger door.
The LED illuminates and the LED of the
driver’s side outside mirror goes out.
Interior mirror, manually dim-
mable
To reduce blinding glare from the interior
mirror, tilt the lever forward on the man-
ually dimming interior mirror.
Seite 105
Seats, mirrors and steering wheel CONTROLS
105
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Need help?
General
