4. Insert the new wiper blade by pressing
it on until you hear it snap into the
holder.
5. Fold in the wipers.
Additional information:
Fold-out position of the wipers, refer to
page 159.
Replacing the rear wiper blade
The rear wiper blade is engaged on the
end of the wiper arm. To replace the wiper
blade, proceed as follows:
1. Fold out the wiper arm and pull off the
wiper blade, arrow.
2. Attach the new wiper blade. The wiper
blade must engage audibly.
3. Fold in the wiper arm.
Lights and bulbs
Principle
The bulbs and lights contribute signifi-
cantly to driving safety.
All headlights and lights are designed using
LED technology at least.
In the event of a malfunction, the vehicle
manufacturer recommends having any nec-
essary work performed by an authorized
service center or another qualified service
center or repair shop.
Safety information
Warning
Intense brightness can irritate or damage
the retina of the eye. There is a risk of
injury. Do not look directly into the head-
lights or other light sources. Do not re-
move the LED covers.
Headlight glass
The inside of the headlight glass may fog up
in cool or damp weather. Condensation will
disappear after a short time when driving
with the lights on. The headlight glass does
not need to be changed.
If, despite driving with the headlights
switched on, moisture such as water drop-
lets increasingly forms in the light, have the
headlights checked.
Vehicle battery
Principle
The vehicle battery is maintenance-free.
More information on the vehicle battery can
be requested from an authorized service
center or another qualified service center
or repair shop.
Safety information
DANGER
Contact with live components can lead to
an electric shock. There is a risk of injury
or danger to life. Do not touch any compo-
nents that are under voltage.
Seite 329
Replacing components MOBILITY
329
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
