– Depending on vehicle equipment: Sport
Boost function.
– Lists and messages.
– The driver assistance systems.
Some of this information is only displayed
briefly as needed.
Turning the Head-up display on/off
When switching on, the projection screen
of the Head-up display is extended. When
switching off, the projection screen of the
Head-up display is retracted again.
To turn the Head-up display on/off, go
through the menu as follows: Apps menu /
"Vehicle" / "Displays" / "Head-up display" /
"Head-up display".
Settings
Individual settings can be entered for the
Head-up display such as for the height,
brightness or illustration. You can also set
up specific views on the Head-up display
separately, e.g., for Driver Assistance infor-
mation.
1. Go through the menu as follows: Apps
menu / "Vehicle" / "Displays" / "Head-up
display".
2. Select the desired setting.
Depending on vehicle equipment, the height
of the Head-up display can be stored using
the memory function.
Visibility of the display
The visibility of the displays in the Head-up
display is influenced by the following fac-
tors:
– Seat position.
– Dust or dirt on the projection screen of
the Head-up display.
– Sunglasses with certain polarization fil-
ters.
– Wet road.
– Unfavorable light conditions.
Check Control
Principle
The Check Control system monitors func-
tions in the vehicle and notifies you of
faults in the monitored systems.
A Check Control message, combining indi-
cator lights or warning lights and text, ap-
pears on the Interaction Unit and Head-up
display, where applicable. In addition, an
acoustic signal may sound.
Some Check Control messages are hidden
automatically after approx. 20 seconds, but
they will be stored. Stored Check Control
messages can be displayed on the Interac-
tion Unit. Urgent Check Control messages
are permanently displayed but may be hid-
den temporarily.
Hiding Check Control messages
Permanently displayed Check Control mes-
sages can be hidden temporarily. These
messages are automatically displayed again
after approx. 8 seconds.
The close icon next to the Check Control
message indicates whether the Check Con-
trol message can be hidden.
Displaying stored Check Control
messages
Saved Check Control messages and addi-
tional information such as the cause of a
fault or the required action can be called up
via Check Control.
Seite 133
Displays CONTROLS
133
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
