automatic camera perspective will then be
maintained for the current parking opera-
tion.
Turning the camera view on/off
manually
1. To turn on automatic camera per-
spective manually, press the Park Assist
key on the switch cluster.
The parking assistance systems view is
displayed.
2. The icon for automatic camera per-
spective is automatically selected in the
selection window.
To exit the steering-dependent camera
view, select another camera view in the se-
lection window or press the Park Assist key
again.
Lateral Parking Aid display
To protect the sides of the vehicle, obstacle
markings are displayed on the sides of the
vehicle.
Colored obstacle markings warn the driver
when obstacles have been detected.
If no obstacle markings are displayed, no
obstacles have been detected.
Limits of the side protection
The Lateral Parking Aid only displays sta-
tionary obstacles that were previously de-
tected by the sensors while passing them.
The system does not detect whether an ob-
stacle moves later on. For this reason, at
standstill, the marks are not shown anymore
in the display after a certain time. The area
next to the vehicle must be newly captured.
Side view
Principle
Side view shows the vehicle's side sur-
roundings, making it easier to position the
vehicle at the curb or with other obstacles
on the side.
The camera view looks from the rear to the
front and, if there is a hazard, focuses auto-
matically on potential obstacles.
The side view can be turned on/off using
the Interaction Unit.
General information
Follow the information in the "Parking as-
sistance systems" chapter.
Turning the side view on/off
The selection window lets you choose the
side view for the left or right side of the
vehicle.
1. To turn on side view, press the
Park Assist key on the switch cluster.
The parking assistance systems view is
displayed.
2. Select the camera icon for the desired
vehicle side in the selection window.
To exit the side view, select another camera
view in the selection window.
Seite 225
Parking CONTROLS
225
Online Edition for Part no. 01405B37A59 - II/24