Display in camera view
The respective boundary area, arrow 1, in
the camera image flashes red if vehicles are
detected by the sensors.
Yellow lines, arrow 2, mark the bumper of
your own vehicle.
Acoustic warning
In addition to the visual warning of the
Cross Traffic Warning function, an acoustic
signal sounds if your vehicle moves in the
corresponding direction.
Depending on the national-market version,
the signal tone will already sound when the
gear position is engaged.
System limits
System limits of the sensors
The Cross Traffic Warning may be re-
stricted by the system limits of the sensors.
Additional information:
Sensors of the vehicle, refer to page 34.
Functional limitations
The Cross Traffic Warning system may be
restricted in the following situations:
– In tight curves.
– Crossing objects are moving at a very
slow or a very fast speed.
– Other objects that hide cross traffic are
in the capture range of the sensors.
Drive Recorder
Principle
The Drive Recorder stores brief video re-
cordings your vehicle's surroundings, e.g.,
to document surrounding traffic. To do so,
the system must be activated on the Inter-
action Unit before using it for the first time.
The Interaction Unit can be used to config-
ure video recording settings, e.g., recording
type and duration.
Video recordings can be saved in different
ways:
– Automatic storage of recordings makes
it possible to document the vehicle acci-
dent or theft using the corresponding
recording type configured.
– Saving recordings manually helps you
document traffic situations using your
set recording type.
Depending on vehicle equipment, video re-
cordings can be saved directly to a mobile
device, e.g., a smartphone or USB stick.
Assistance system cameras are used to re-
cord, e.g., panorama view cameras.
In addition, the following parameters are
stored for the trip:
– Date.
– Time.
– Speed.
– GPS coordinates.
Data protection
The Drive Recorder is permitted to record
and evaluate video recordings in accordance
with applicable regulations of the country
in which the system is to be used. The user
is responsible for the use of the system and
compliance with respective applicable regu-
lations.
Seite 187
Safety CONTROLS
187
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
