3. Press the switch forward for approx. 2
seconds again until the seat stops.
4. Repeat step 3 until the seat stops then
moves slightly backward.
As soon as the message on the Interaction
Unit disappears, the calibration is complete.
If the message remains active, repeat the
calibration.
If the message is still shown after repeated
calibration, have the vehicle checked by an
authorized service center or another quali-
fied service center or repair shop.
Comfort exit
Principle
The comfort exit setting makes it easier to
get in/out of the vehicle by automatically
adjusting the seat position and moving the
seat back.
Activating/deactivating comfort
exit
1. Go through the menu as follows: Apps
menu / "Vehicle" / "Seat comfort" /
"Comfort exit".
2. Select the desired setting.
Seat belts
Principle
The vehicle is fitted with four seat belts
to ensure occupant safety. However, they
can only offer protection when adjusted cor-
rectly.
Always make sure that seat belts are being
worn by the occupants before driving off.
The airbags supplement the seat belts as an
additional safety device. The airbags do not
replace seat belts.
All seat belt anchorage points are designed
to achieve the best possible protective ef-
fect for the seat belts when used properly
and with the correct seat settings.
Additional information:
Notes on sitting safely, refer to page 94.
Safety information
Warning
Use of a seat belt to buckle more than one
person will potentially defeat the ability of
the seat belt to serve its protective func-
tion. There is a risk of injury or danger to
life. Do not strap in more than one person
per single seat belt. Infants and children
are not allowed on an occupant's lap, and
must be transported and secured in desig-
nated child restraint systems.
Warning
The protective effect of safety gear, in-
cluding seat belts, can be limited or lost
when seat belts are fastened incorrectly.
An incorrectly fastened seat belt can cause
additional injuries, for instance in the
event of an accident, braking or evasive
maneuvers. There is a risk of injury or
danger to life. Make sure that all occu-
pants are wearing seat belts correctly.
Warning
The protective effect of safety gear, in-
cluding seat belts, may not be fully opera-
tional or fail in the following situations:
– The seat belts or seat belt buckles are
damaged, soiled, or changed in any
other way.
– Seat belt tensioners or seat belt wind-
ers were modified.
Seite 99
Seats, mirrors and steering wheel CONTROLS
99
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
