Tilt alarm sensor
The tilt alarm sensor is part of the alarm
system and monitors the vehicle's tilt.
The alarm system responds in situations
such as attempts to steal a wheel or when
the vehicle is towed.
Interior motion sensor
The interior motion sensor is part of the
alarm system and monitors the vehicle inte-
rior.
The alarm system triggers when movement
is detected inside the vehicle.
The windows must be closed for the system
to function properly.
Avoiding unintentional alarms
General information
The tilt alarm sensor and interior motion
sensor can trigger an alarm, although no
unauthorized action occurred.
An unintentional alarm can be triggered in
the following situations:
– In car washes.
– In duplex garages.
– During transport on trains carrying ve-
hicles, at sea or on a trailer.
– With animals in the vehicle.
– When the vehicle is locked after start of
refueling.
The tilt alarm sensor and the interior mo-
tion sensor can be switched off in such sit-
uations.
Switching off the tilt alarm sensor and
interior motion sensor
The tilt alarm sensor and interior motion
sensor can be turned off as follows:
– As soon as the vehicle is locked,
press the lock button on the vehi-
cle key within 30 seconds.
The indicator light illuminates for ap-
prox. 2 seconds and then continues to
flash.
– After standby state turns off, an option
to deactivate the interior motion sensor
and tilt alarm sensor appears on the In-
teraction Unit.
The tilt alarm sensor and interior motion
sensor are deactivated until the vehicle is
locked again.
Ending the alarm
To stop the alarm, unlock the vehicle.
If the vehicle is unlocked with the
integrated key, the drive-ready state must
subsequently be turned on via the emer-
gency detection of the vehicle key.
Window
Principle
The windows can be operated as follows:
– With the vehicle key.
– Using the door handle.
– Using the switches inside the vehicle.
Safety information
Warning
When operating the windows, body parts
and objects can be jammed. There is a risk
of injury or risk of damage to property.
Make sure that the travel path of the win-
dows is clear while opening and closing.
Seite 87
Opening and closing CONTROLS
87
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
