Forward Collision Mitigation, refer to
page 167.
System limits
General information
Follow the system limits in the "Forward
Collision Mitigation" chapter.
Detection range
With the rear-end collision warning func-
tion, the following may not be detected or
may be detected only with a delay in the
detection range of the sensors, e.g.:
– Preceding vehicle driving slowly and be-
ing approached at high speed.
– Vehicles that suddenly swerve in front
of you, or strongly decelerating vehicles.
– Vehicles with unusual rear designs.
Warning function for oncom-
ing traffic
Principle
To warn the driver of a possible risk of col-
lision with oncoming traffic, the Oncoming
Traffic Warning function displays a warn-
ing light on the Interaction Unit and brakes
automatically when necessary. You can can-
cel automatic brake intervention manually,
e.g., by actively moving the steering wheel.
In the event of an accident, the system
helps by reducing impact speed.
The time of warnings may vary depending
on the current driving situation.
The sensors detect the traffic situation in
their detection range.
Safety information
Follow the safety information in Chapter
“Forward Collision Mitigation”.
Speed range
The oncoming traffic warning is activated
when your vehicle speed is greater than ap-
prox. 3 mph/5 km/h.
Interaction Unit view
If there is a risk of collision with a detected
vehicle, a warning light is shown on the In-
teraction Unit and Head-up display, depend-
ing on vehicle equipment.
Icon Meaning
Oncoming traffic warning when a
vehicle is detected.
General risk of collision.
Warning function
The oncoming traffic warning function is-
sues warnings on different levels, depend-
ing on the respective hazard situation. This
system prompts the driver to intervene
manually.
In case of a possible risk of collision, a
brake intervention is triggered.
Seite 171
Safety CONTROLS
171
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
