Display
The maximum opening angle of the doors is
displayed in selector lever position P.
System limits
The door opening angle view does not warn
you of approaching road users.
The vehicle's surroundings are distorted in
the display for technical reasons.
Even if no objects are visible in the door
opening angle view on the Interaction Unit,
park carefully when near other objects.
Because of the perspective, higher, protrud-
ing objects may be closer than they appear
on the Interaction Unit.
Remote 3D View
Principle
The MINI app and parking camera views,
e.g., automatic camera perspective, can be
used to display the vehicle’s surroundings
on a mobile device.
Remote 3D View shows a snapshot of the
situation.
General information
For reasons of data protection, Remote
3D View can only be used three times
within two hours.
Follow the information in the "Parking as-
sistance systems" chapter.
Sensors
Remote 3D View is controlled by the follow-
ing sensors:
– Front camera.
– Exterior mirror cameras.
– Rearview camera.
Functional requirements
The following functional requirements apply
for Remote 3D View:
– Data transfer must be activated.
– The MINI app must be installed on the
mobile end device.
– In MINI Connected countries, an exist-
ing MINI Connected account must be
used to activate a MINI ID.
Additional information:
– Data protection, refer to page 59.
– MINI ID, refer to page 60.
Activating/deactivating Remote 3D
View
Remote 3D View can be activated or deac-
tivated individually or together with other
functions.
1. Go through the menu as follows: Apps
menu / "All" / "Data privacy".
2. Select the desired setting.
After activating, Remote 3D View can
be accessed in the MINI app.
Functional limitations
Remote 3D View may not be fully opera-
tional or may not be available in the follow-
ing situations:
Seite 229
Parking CONTROLS
229
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
