Interior mirror, automatic
dimming feature
Principle
The interior mirror is dimmed automati-
cally.
Photocells in the mirror glass and on the
rear of the mirror are used to control glare.
Overview
Functional requirements
To ensure that the auto dimming interior
mirror works properly, note the following:
– Keep the photocells clean.
– Do not cover the area between the inte-
rior mirror and the windshield.
Steering wheel
Safety information
Warning
Steering wheel adjustments while driving
can lead to unexpected steering wheel
movements. Vehicle control could be lost.
There is a risk of accident, injury, or prop-
erty damage. Adjust the steering wheel
while the vehicle is stationary only.
Manual steering wheel adjustment
The position of the steering wheel can be
changed by manually adjusting the height
and longitudinal direction.
1. On the steering column, press the re-
lease lever all the way down.
2. Grip the steering wheel with both hands
and move the steering wheel to the pre-
ferred height and angle to suit your seat
position.
3. Fold the lever back up.
Memory function
Principle
The following settings can be stored and,
if necessary, retrieved using the memory
function:
– Seat position.
– Exterior mirror adjustment.
– Depending on the equipment: height of
the Head-up display.
General information
Two memory locations with different set-
tings can be set for each driver profile.
The settings for the lumbar support will not
be stored.
Seite 106
CONTROLS Seats, mirrors and steering wheel
106
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
