Upper position
Insert the cargo area floor into the upper
position of the holder, arrow 1, then place
it on the console and edge of the rear wall,
arrow 2.
– With the backrests folded down, a long,
flat loading platform is produced.
– There is space under the cargo area floor
for additional cargo.
Lower position
Insert the cargo area floor from above into
the lower position of the holder, then fold it
down.
– Larger objects can be transported.
– There is space under the cargo area floor
for smaller cargo.
Enlarging the cargo area
Principle
The cargo area can be enlarged by folding
down the rear seat backrests.
General information
The rear seat backrest is divided at a ratio
of 60 to 40.
The rear seat backrests can be folded down
from the rear.
Safety information
Warning
There is a danger of jamming with fold-
ing down the rear seat backrests. There
is a risk of injury or risk of damage to
property. Make sure that the area of move-
ment of the rear seat backrest and the of
the head restraint is clear prior to folding
down.
Warning
If a rear seat backrest is not locked, unse-
cured cargo can be thrown about the car’s
interior; for instance, in the event of an
accident, braking or an evasive maneuver.
There is a risk of injury. Make sure that
the rear seat backrest is locked after fold-
ing it back.
Warning
The stability of the child restraint system
is limited or compromised with incorrect
seat setting or improper installation of the
child seat. There is a risk of injury or
danger to life. Make sure that the child
restraint system fits securely against the
backrest. If possible, adjust the backrest
Seite 270
CONTROLS Cargo area
270
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
