Switching the cooling function
on/off
The air conditioning can be turned on/off
using the Interaction Unit:
1. Select the Climate menu icon on
the menu bar.
2. Tap the climate control function
button.
In recirculated-air mode, the air condition-
ing is automatically turned on to dry the air
and avoid window condensation.
Depending on the weather, the windshield
and the side windows may fog up briefly
when drive-ready state is switched on.
When using the cooling mode, condensa-
tion that will exit below the vehicle.
Maximum cooling
Principle
Maximum cooling is used to cool the vehicle
interior quickly and effectively.
The lowest temperature and the maximum
air flow are set automatically.
Functional requirement
Maximum cooling can be used when
the outside temperature exceeds approx.
32 ℉/0 ℃ and when drive-ready state is on.
Turning maximum cooling on/off
Maximum cooling can be turned on/off us-
ing the Interaction Unit:
1. Select the Climate menu icon on
the menu bar.
2. Tap the maximum cooling button.
The air vents open. Air flows out of the air
vents to the upper body area.
Air recirculation mode
Principle
With air recirculation, if unpleasant odors
or pollutants are detected in the outside air,
the outside air supply can be temporarily
stopped. The system then recirculates the
interior air.
With automatic air recirculation, outside air
is fed in, or the interior air is recirculated,
depending on the outside air quality.
When air recirculation is off, outside air is
channeled into the interior.
The interior filter cleans the incoming fresh
air or the circulated interior air in recircula-
tion mode.
General information
If there is window condensation, turn off
the air recirculation.
Seite 248
CONTROLS Climate control
248
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
