LATCH child restraint system
Principle
LATCH child restraint systems establish a
secure connection to the vehicle in combi-
nation with LATCH anchors.
General information
LATCH: Lower Anchors and Tether for Chil-
dren.
When selecting, installing, and using
LATCH child restraint systems, pay close at-
tention to the operating and safety instruc-
tions provided by the child restraint system
manufacturer.
Mounts for lower anchors
General information
The lower anchors may be used to attach
the CRS to the vehicle seat up to a com-
bined child and CRS weight of 65 lbs/30 kg
when the child is restrained by the internal
harnesses.
Safety information
Warning
If the lower anchors on child restraint sys-
tem are not engaged correctly, the child
restraint system will not be able to pro-
vide suitable protection. There is a risk of
injury or danger to life. Make sure that
the lower anchors are correctly engaged
and that the child restraint system fits se-
curely against the backrest.
Warning
The mounts for the lower anchors and
attachment points of the child restraint
system are intended for attaching child re-
straint systems only. If other objects are
attached, the mounts or attachment points
can be damaged. There is a risk of injury
or risk of damage to property. Only attach
child restraint systems at the correspond-
ing mounts for the lower anchors or at-
tachment points.
Position
Icon Meaning
The corresponding icon
shows the mounts for the
lower LATCH anchors.
Seats equipped with lower
anchors are marked with a
pair (2) of LATCH icons.
For vehicles equipped with
a middle seat:
It is not recommended to
use the inner lower anchors
of standard outer LATCH
positions to fasten a child
restraint system on the mid-
dle seat. Use the vehicle
seat belt instead for the
middle seat.
Before attaching child restraint
systems
Before installing a child restraint system,
pull the seat belt away from the child seat
mountings.
Seite 112
CONTROLS Transporting children safely
112
Online Edition for Part no. 01405B37A59 - II/24