Additional information:
Forward Collision Mitigation, refer to
page 167.
System limits
General information
Follow the system limits in the "Forward
Collision Mitigation" chapter.
Detection range
With the oncoming traffic warning func-
tion, the following may not be detected or
may be detected only with a delay in the
detection range of the sensors, e.g.:
– Oncoming vehicles at a very high speed.
– Vehicles with an unusual front view.
Warning function for turning
with oncoming traffic
Principle
To warn the driver of a possible risk of
collision with oncoming traffic when turn-
ing, the Oncoming Traffic Warning function
displays a warning light on the Interaction
Unit and brakes automatically when neces-
sary. You can cancel automatic brake inter-
vention manually, e.g., by actively moving
the steering wheel.
In the event of an accident, the system
helps by reducing impact speed.
The time of warnings may vary depending
on the current driving situation.
The sensors detect the traffic situation in
their detection range.
Safety information
Follow the safety information in Chapter
“Forward Collision Mitigation”.
Speed range
The warning function for turning is acti-
vated when your vehicle speed is greater
than approx. 3 mph/5 km/h.
This system reacts when your vehicle speed
is less than approx. 15 mph/25 km/h.
Interaction Unit view
If there is a risk of collision with a detected
vehicle, a warning light is shown on the In-
teraction Unit and Head-up display, depend-
ing on vehicle equipment.
Icon Meaning
Oncoming traffic warning when a
vehicle is detected.
General risk of collision.
Warning function
The warning function for turning with on-
coming traffic issues warnings on different
levels, depending on the respective hazard.
This system prompts the driver to intervene
manually.
Seite 172
CONTROLS Safety
172
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
