Rear window defroster
Principle
With the rear window defroster, ice and
condensation are quickly removed from the
rear window.
Functional requirement
The rear window heating can be used when
standby or drive-ready state is on.
Turning the rear window defroster
on/off
To turn the rear window heating on/
off, press the rear window heating
button on the switch cluster.
The LED illuminates when the rear window
heating is turned on.
The rear window defroster switches off au-
tomatically after a certain period of time.
Seat heating
Principle
When the seat heating is used, seats are
heated depending on the outside tempera-
ture and the interior temperature.
The intensity can be stored using the au-
tomatic program. This function can be ad-
justed as necessary.
General information
If the trip is continued within approx.
15 minutes after an intermediate stop, the
functions are turned on automatically with
the temperature that was last set.
Adjusting seat heating
Automatic program
When the automatic program is activated,
the intensity of seat heating can be ad-
justed: As you drive, the heater output is
automatically adjusted according to your set
intensity.
Adjusting seat heating manually
The heater output level can be adjusted
manually:
1. Tap the button with temperature dis-
play.
2. Press the seat heating button repeatedly
until the desired level is selected, arrow.
If a consumption-optimized drive mode is
selected, the heater output is reduced.
Steering wheel heating
Principle
When the steering wheel heating is used,
the steering wheel is heated depending on
the outside temperature and the interior
temperature.
The intensity can be stored using the au-
tomatic program. This function can be ad-
justed as necessary.
Seite 250
CONTROLS Climate control
250
Online Edition for Part no. 01405B37A59 - II/24
To Next Page
Loading...
Need help?
General
