Omron NX102-12 Series User Manual

5-2
LINK Settings Display
NX701 CPU Unit
NX102 CPU Unit
NJ-series CPU Unit
NX1P2 CPU Unit

LINK Settings - Port 1 and Port 2 (NX701 and NX102 CPU Units)
Set for each built-in EtherNet/IP port.
Setting Description Default
LINK settings Set the baud rate for the built-in EtherNet/IP ports.
• Auto
• 10 Mbps Half Duplex
• 10 Mbps Full Duplex
• 100 Mbps Half Duplex
• 100 Mbps Full Duplex
• 1000 Mbps Full Duplex (NX701 CPU Unit)
Auto

LINK Settings (NJ-series CPU Unit and NX1P2 CPU Unit)
Setting Description Default
LINK settings Set the baud rate for the built-in EtherNet/IP ports.
• Auto
• 10 Mbps Half Duplex
• 10 Mbps Full Duplex
• 100 Mbps Half Duplex
• 100 Mbps Full Duplex
Auto
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-8
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English