Omron NX102-12 Series User Manual

12-2
FTP Client Communications Instruc-
tions
FTP client communications instructions are always used to transfer files with the FTP client. The FTP
client communications instructions and their functions are given in the following table.
Instruction Function
FTPGetFileList Gets a file list from the FTP server.
FTPGetFile Downloads one or more files from the FTP server.
FTPPutFile Uploads one or more files to the FTP server.
FTPRemoveFile Deletes one or more files from the FTP server.
FTPRemoveDir Deletes a directory from the FTP server.
For details on the FTP client communications instructions, refer to the NJ/NX-series Instructions
Reference Manual (Cat. No. W502).
12-2-1
Functions of the FTP Client Communications Instructions
This section describes the functions of the FTP client communications instructions.
FTPGetFileList Instruction
The FTPGetFileList instruction gets a list of files and folders in a specified directory on the FTP server.
The following information is obtained.
•
The number of files and folders in the specified directory
• The names of the files and folders
• The last updated date and time of each file and folder
• The file sizes
• The read-only attributes of the files and folders
You can specify the following option.
• Open Mode for data connection
Ethernet
F
TP server
File and folder information from
the specified directory on the FTP server
FTP client
12 FTP Client
12-5
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
12-2 FTP Client Communications Instructions
12
12-2-1 Functions of the FTP Client Communications Instructions

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English