Omron NX102-12 Series User Manual

9-4
Settings Required for the Socket
Services
Make the following settings in the Unit Setup to use the socket services.
Sysmac Studio
Unit Settings T
ab
Page
Setting Setting conditions
Setting Local IP Address Required
Subnet Mask Required
TCP/IP Keep Alive Optional (Change when the default setting of 5 minutes is un-
acceptable.)
Linger Option Optional
Additional Information
Make this setting in the TCP/IP Settings Display
. Refer to 5-1 TCP/IP Settings Display on
page 5-2 for information on the TCP/IP Settings Display.
9 Socket Service
9-11
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
9-4 Settings Required for the Socket Services
9

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English