Omron NX102-12 Series User Manual


Recognition 1
Setting Description Default
Recognition method Set the method to use to specify SNMP managers for which ac-
cess is permitted.
• IP address
• Host name
Make these settings to permit access by only certain SNMP
managers.
Access is not allowed unless an IP address or host name is set.
IP address
IP address Set the IP address of the SNMP manager.
If the default setting of 0.0.0.0 is used, access by all SNMP man-
agers is permitted.
(Set this setting if Recognition method in Recognition 1 is set to
the IP address
Option.)
None
Host name Set the host name of the SNMP manager.
(Set this setting if Recognition method in Recognition 1 is set to
the Host name Option.)
(Y
ou can use up to 200 single-byte alphanumeric characters,
dots, and hyphens with up to 63 single-byte alphanumeric char-
acters between dots.)
None
Community name Set the community name to enable the SNMP manager to ac-
cess information from the built-in EtherNet/IP port.
(Single-byte alphanumeric characters, dots, and hyphens: 255
characters max.)
public

Recognition 2
Setting Description Default
Recognition 2 Specify whether to use the recognition 2 settings.
• Use
• Do not use
Do not use
Recognition method Set the method to use to specify SNMP managers for which ac-
cess is permitted.
• IP address
• Host name
Make these settings to permit access by only certain SNMP man-
agers.
Access is not allowed unless an IP address or host name is set.
IP address
IP address Set the IP address of the SNMP manager.
If the default setting of 0.0.0.0 is used, access by all SNMP man-
agers is permitted.
(Set this setting if Recognition method in Recognition 2 is set to
the IP address Option.)
None
Host name Set the host name of the SNMP manager.
(Set this setting if Recognition method in Recognition 2 is set to
the Host name Option.)
(Y
ou can use up to 200 single-byte alphanumeric characters,
dots, and hyphens for a host name, including up to 63 single-byte
alphanumeric characters between two dots.)
None
Community name Set the community name to enable the SNMP manager to ac-
cess information from the built-in EtherNet/IP port.
(Single-byte alphanumeric characters, dots, and hyphens: 255
characters max.)
public
5 Sysmac Studio Settings for the Built-in EtherNet/IP Port
5-13
NJ/NX-series CPU Unit Built-in EtherNet/IP Port User’s Manual (W506)
5-5 SNMP Settings Display
5

Omron NX102-12 Series Specifications

General

Brand	Omron
Model	NX102-12 Series
Category	Controller
Language	English