3.30
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
OIL TANK INSTALLATION
1. Install the oil tank
u
by quickly installing the oil line
t
onto the fitting
y
.
NOTICE
Place a rag under the fitting to catch any spilled oil.
2. Secure the oil line with the springband clamp
r
.
3. Slide the oil tank into position and align mounting
holes with the mounting brackets on the clutch guard.
4. Install washers
e
and oil tank mounting fasteners
w
.
Torque fastener to specification.
TORQUE
Oil Tank Mounting Fasteners:
7 ft-lbs (9 N·m)
5. Connect the oil level sender
q
.
6. Verify the oil tank has the specified amount of fluid.
7. Install the hood and side panels.
ENGINE / COOLING / EXHAUST