Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

3.152
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
EXHAUST REMOVAL
1. Remove the side panels and hood.
2. Using a commercially available spring removal /
installation tool, remove the exhaust springs
q
connecting the resonator and the tuned pipe.
3. Remove the exhaust spring
w
connecting the front of
the resonator to the chassis.
4. Remove the exhaust spring
e
connecting the rear of
the resonator to the chassis.
5. Cut the cable tie
r
that secures the EGT sensor to
the main harness.
6. Disconnect the EGT sensor
t
.
7. Remove the exhaust spring
y
connecting the tuned
pipe to the chassis.
8. Carefully separate the resonator and tuned pipe and
lift upward to remove the resonator from the chassis.
ENGINE / COOLING / EXHAUST

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 Specifications

General

Brand	Polaris
Model	850 MATRYX SWITCHBACK ASSAULT 146 2021
Category	Snowmobiles
Language	English