3.136
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
COOLANT BOTTLE / THERMOSTAT
INSTALLATION
1. Carefully install the coolant bottle
2. Connect all the cooling hoses and slide the
springband clamps
r
down to secure the coolant
hoses.
3. Install the two fasteners
e
securing the coolant bottle
to the footrest and torque fasteners to specification.
TORQUE
Coolant Bottle Mounting Fasteners:
7 ft-lbs (9 N·m)
4. Install the two plastic rivets
w
to secure the
connector placement bracket to the coolant bottle.
5. Install the fuel tank.
6. Install new brake caliper mounting fasteners
r
and
torque fasteners to specification.
TORQUE
Brake Caliper Mounting Fasteners:
40 ft-lbs (54 N·m)
7. Install the fuel tank. See Fuel Tank Installation page
5.29.
8. Install the console. See Console Installation page
9.25.
9. Install the resonator. See Exhaust Installation page
3.155.
10.Fill coolant bottle with coolant and follow coolant
bleeding procedure.
11. Install hood and side panels.
ENGINE / COOLING / EXHAUST
To Next Page
Loading...
Need help?
General
