Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

8.52
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
TWO PIECE THROTTLE CONTROL
REMOVAL
NOTICE
Some models are equipped with a two-piece throttle
control on the handlebar. The two-piece throttle control
is designed to be serviced without having to remove the
grip and hand warmer element.
1. Use a needle-nose pliers to extract the throttle cable
barrel out of the throttle lever.
2. Loosen the throttle block set screw
q
.
3. Remove the e-clip
w
, the throttle lever pin
e
, and
adjustment washers
r
. Note the number of washers.
4. Remove the throttle lever
t
and remove the wiring
from the clip on the throttle block.
NOTICE
The throttle lever will just be moved to the side as the
wiring is part of the handlebar wiring harness.
5. Remove the screw
y
from the auxiliary stop switch
block. Remove or reposition the stop switch assembly
u
to gain access the cover screws.
NOTICE
The auxiliary stop switch block will just be moved to the
side as the wiring is part of the handlebar wiring
harness.
STEERING / SUSPENSIONS

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 Specifications

General

Brand	Polaris
Model	850 MATRYX SWITCHBACK ASSAULT 146 2021
Category	Snowmobiles
Language	English