Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

9
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
9.25
CONSOLE INSTALLATION
1. Place console near its installed position and connect
the main harness key switch connector
f
to the key
switch.
NOTICE
If not previously removed, the switch panel may be
removed to aid in connecting the key switch connector
and any accessory connections. Reinstall the switch
panel once all connections are made.
2. Remove the fuel cap and install the console into
position. Install the plastic fuel filler neck nut
d
and
fuel cap
s
.
NOTICE
When installing the console, make sure the o-ring on
the fuel tank neck is in place and not damaged.
3. Install the two fasteners
i
, push-pin rivet
o
and
clutch tool
a
that secure the lower portion of the
console. Torque fastener to specification.
TORQUE
Console Fasteners:
71 in-lbs (8 N·m)
4. Install the two push-pin rivets
u
that secure the front
of the console to the lower intake plenum.
CHASSIS

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 Specifications

General

Brand	Polaris
Model	850 MATRYX SWITCHBACK ASSAULT 146 2021
Category	Snowmobiles
Language	English