Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 User Manual

3
9850064 R03 - 2021 650 / 850 Matryx Trail Performance / Crossover Snowmobile Service Manual
© Copyright Polaris Inc.
3.143
AIR BOX REMOVAL
1. Remove the side panels and hood.
2. Remove the console. See Console Removal page
9.23.
3. Remove the drive belt and driven clutch. See the
following procedures for removal:
• Drive Belt Removal
• Driven Clutch Removal
4. Remove the oil tank mounting fasteners
q
and
washers
w
securing the oil tank to the clutch guard.
Pull the oil tank away from the clutch guard just
enough to access the intake tube screw.
IMPORTANT
Do not damage the oil supply hose when moving the oil
tank.
5. Remove the fasteners
e
retaining the rear of the
clutch guard
r
and remove the clutch guard by
sliding the front out of the fender.
6. Remove the push rivets
y
retaining the intake tube to
the intake plenum.
7. Remove the cable tie
y
securing the upper intake
tube to the chassis.
8. Remove the diagnostic connector
u
from the cap.
9. Remove the fastener
i
retaining the lower intake
tube.
ENGINE / COOLING / EXHAUST

Polaris 850 MATRYX SWITCHBACK ASSAULT 146 2021 Specifications

General

Brand	Polaris
Model	850 MATRYX SWITCHBACK ASSAULT 146 2021
Category	Snowmobiles
Language	English