R&S OSP User Manual

R&S OSP Remote Control
Operating Manual 1505.3896.12 - 14 147
6.4.4 Reset Values of the Status Reporting System
The table below indicates the effects of various commands upon the status reporting
system of the R&S OSP.
Event
Switching on
supply
voltagePower-
On-Status-Clear
DCL,SDC
(Device Clear,
Selected
Device Clear)
*RST or
SYSTem:PRESet
STATus
:PRESe
t
*CLS
Effect
0
1
Clear STB,ESR
yes
yes
Clear SRE,ESE
yes
Clear PPE
yes
Clear EVENt parts of the
registers
yes
yes
Clear ENABle parts of all
OPERation-and
QUESTionable registers,
Fill ENABle parts of all other
registers with "1".
yes
yes
Fill PTRansition parts with „1"
Clear NTRansition parts
yes
yes
Clear error queue
yes
yes
yes
Clear output buffer
yes
yes
yes
1)
1)
1)
Clear command processing
and input buffer
yes
yes
yes
1) Every command being the first in a command line, i.e. immediately following a <PROGRAM MESSAGE
TERMINATOR> clears the output buffer.

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English