R&S OSP User Manual

R&S OSP Getting Started
Operating Manual 1505.3896.12 - 14 42
3.3.3.2 LAN configuration mode DHCP_STATIC
See chapter 2.9.1.2 for more information on the LAN configuration mode.
Select the menu function >Configure >TCPIP and the following dialog is opened:
The menu allows to specify the static address together with the gateway address.
3.3.4 General Actions of R&S OSP Panel
There are several general actions which can be done from the OSP Panel.
With the menu function >Configure >Reset all switches in the connected R&S OSP are
set to their default positions.
The functions >Configure >Select all Switches and >Configure >Deselect all Switches
define the starting point when collecting the settings for a path configuration. See
chapter 3.4 for more details.
The menu function >Utility > Re-Initialize Frames and Modules will re-establish the
communication link between the R&S OSP and its modules as well as to all extension
units OSP150. Switch settings are not changed.
Other actions are described in the various parts of chapters 3.3 to 3.5.

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English