R&S OSP User Manual

R&S OSP Getting Started
Operating Manual 1505.3896.12 - 14 37
3.3.1 Configuring/Connecting R&S OSP Panel
When starting the OSP Panel, no instrument is connected via LAN network. The OSP
Panel is in simulation mode and the following dialog appears:
The R&S OSP remains in simulation mode as long as no connection to an instrument
via LAN is performed.
To connect an R&S OSP via LAN, perform the following steps:
1. Get the actual IP address as described in chapter 3.1 and enter the address in
the input field RESOURCE DESCR.
2. Press the "Connect to device" button at the upper right corner of the OSP Panel
dialog to connect the instrument.

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English