R&S OSP User Manual

R&S OSP Getting Started
Operating Manual 1505.3896.12 - 14 60
2. Select >Path >Delete Path … in the OSP Panel.
The following dialog appears:
The field shows the names of all paths which already have been defined. The
highlighted path configuration will be deleted when pressing the Delete button.
The selected path will be deleted from the flash memory in the R&S OSP.
The only possibility to recover a path which was unintentionally deleted is to use the
Import Path function, assuming the path has been exported before.
Pressing this button will exit the dialog
3.4.4 Export a Path
If a path has been defined as described in the previous chapter, the path can be
exported to a file as follows:
1. Start the OSP Panel.
2. Select >Path >Export Paths … in the OSP Panel.
The following dialog appears:

R&S OSP Specifications

General

Brand	R&S
Model	OSP
Category	Control Unit
Language	English