Controller Options
Overview
• Always touch a grounded surface to discharge static electricity from your hands before you handle
SD cards, printed circuit boards, or memory boards.
This machine has I/F card slots for optional I/F connections and SD card slots applications.
After you install an option, check that the machine can recognize it (see "Check All Connections" at the
end of this section).
I/F Card Slots
• Slot [A] is used for one of the optional I/F connections (only one can be installed): IEEE1284,
IEEE802.11a/g, g (Wireless LAN), File Format Converter and Gigabit Ethernet board.
Controller Options
127
To Next Page
Loading...
Need help?
General
