Upload
1. Turn off the main power switch of the main machine.
2. Remove the SD slot cover at the left rear side of the machine ( x 1).
3. Install the SD card, which has already been uploaded, into the SD card slot 2 (lower).
4.
Turn on the main power switch.
5. Enter the SP mode.
6. Do SP5-846-052 (Restore All Addr Book).
7. Exit the SP mode, and then turn off the main power switch.
8. Remove the SD card form the SD card slot 2 (lower).
9. Install the SD slot cover.
• The counter in the user code information is initialized after uploading.
• The information of an administrator and supervisor cannot be downloaded nor uploaded.
•
If there is no data of address book information in the SD card, an error message is displayed.
Address Book Upload/Download
617
To Next Page
Loading...
Need help?
General
